Copy Default Settings; Available Default Items - Kyocera Mita KM-1500 Operation Manual

Section 6

Available default items

The state that the copier enters at the end of warm-up or when the Reset/Power key is pressed is called the "initial mode". The modes,
functions and other settings that are automatically pre-set for use in the initial mode are called "default settings". These default settings can
be changed as desired to suit your copying needs.
Each default item, as well as each of the available settings for each item, are represented by code numbers on the copy quantity/magnification
display. Refer to the "Available settings" column in the following tables for the code number that correspond to each setting value. The factory
default setting is indicated by an asterisk.
Item
Default
number
F00 Quit Default Settings
F01 User Copy Setting List
F08 Black Line Correction
F12 Upper Drawer Paper Size
F13 Paper Feeder Paper Size
(option)

COPY DEFAULT SETTINGS

Description
Quits the default settings and returns the
copier to a copy-ready state.
Prints out a list of the currently selected
default settings.
If black lines appear on copies when you feed
originals from the Document Processor (but
they do not exist on the originals themselves),
this function will make them less apparent.
If Black Line Correction is turned on, however,
small and/or detailed text may not be
reproduced as clearly as before, so it is
normally recommended that you do not change
this function from its factory default setting.
* Black Line Correction is not available when
the Photo mode is selected as the image
quality mode.
Registers the size of paper that is loaded in the
drawer that is included with your copier.
Registers the size of paper that is loaded in the
optional Paper Feeder.
* If the optional Paper Feeder is not installed
on your copier, this default setting will not
appear.
Available settings
---
---
1-: OFF*
2-: Weak
3-: Strong
-A4: A4
-A5: A5
-Fo: Folio
-Lg: Legal
-Lt: Letter
-o2: Oficio II
(Inch specification default:
Letter)
(Metric specification
default: A4)
-A4: A4
-A5: A5
-Fo: Folio
-Lg: Legal
-Lt: Letter
-o2: Oficio II
(Inch specification default:
Letter)
(Metric specification
default: A4)
Reference
page
---
6-4
6-4
6-7
6-4
6-7
6-4
6-7
6-1