Selecting The Order Of 4-In-1 Layout - Kyocera Mita KM-1500 Operation Manual

4
Press the Number of Copies / Zoom(+) or the Number of
Copies / Zoom(-) key to select the desired borderline.
The displayed code numbers refer to the available
borderline types as explained in the following table.
Code number
1-
2-
3-
5
Press the Recall%/Enter key.
The displayed numbers will flash and the copier will return
to a copy-ready state.
Borderline types
None
Solid line
Dotted line
Section 5 COPY FUNCTIONS

Selecting the order of 4-in-1 layout

Perform the following procedure if you want to select the order in
which the images will appear within the copy page in the 4-in-1
mode.
1-:
1 2
3 4
3-:
1 2
3 4
1
Press down on the 2in1/4in1 key for at least 3 seconds.
2
Press the Number of Copies / Zoom(+) or the Number of
Copies / Zoom(-) key until "F17" (Default item: 4-in-1
Layout Order) is shown.
3
Press the Recall%/Enter key.
2-:
1 3
2 4
4-:
1 3
2 4
5-7