Retrieving A Parked Call; Music On Hold; Mute; On-Hook Dialing - Linksys SPA-941 User Manual

Music on Hold

Retrieving a Parked Call

Music on Hold

Mute

On-hook Dialing

42 System Telephone Features
3. Enter *11 and press the dial soft key.
You will hear a prompt stating the extension where the call is parked.
NOTE: Write down the Park Number because you will need to know it to retrieve this
parked call.
4. Hang up.
NOTE: You can retrieve parked calls using any phone in the system.
1. Pick up the handset or press the speaker button (if available).
2. Dial the call ID number of the parked call you wish to retrieve.
3. Speak with the parked caller.
Your telephone provides crystal clear voice conversations. However, if you listen to
music on hold, you may notice that some types of music sound slightly distorted.
This is normal. The FrameMaker system has been optimized to transmit and
receive speech; music contains a variety of sounds that are considerably higher
and lower in pitch than the human voice, so some of these musical sounds are not
included in the audio signal.
Press the Mute button (
during a conversation. This way, you can converse with someone else without the
party on the phone hearing the conversation. Press and hold the Mute button again
to turn the speakerphone/handset microphone back on.
You can dial a number while the handset is on-hook by doing one of the following:
•
Dial the phone number on the keypad and press the dial softkey.
•
Press the dir softkey, use the scroll keys to select a person to call, then
press the dial softkey.
•
Press the redial softkey, use the scroll keys to select a person to call, then
press the dial softkey.
) to turn off the speakerphone/handset microphone
Linksys SPA-941 Telephone User Guide
620-05600390