Zeroing Out To A Custom Operator - Linksys SPA-941 User Manual

Zeroing Out to a Custom Operator

Zeroing Out to a Custom Operator
112 Voice Mail Features (Option B Menu)
When callers reach your voice mail, you can give them the option to leave a
message or dial zero (0) and reach your custom operator (which may be the auto
attendant or another phone number). By default, the system will route callers to the
auto attendant when they press zero. You can change the destination from the
voice mail main menu.
TIP: When you record your greetings, be sure to tell callers than they can
press zero (0) to be transferred to the auto attendant or to your designated
alternate phone number.
NOTE: This feature is not supported for stand-alone mailboxes.
To hear or change where pressing zero (0) goes, follow these steps:
1. Access the voice mail system.
2. Press 16 to access the Mailbox Options menu.
3. Press 5 to hear or change your custom operator selection.
4. You should hear an announcement that your custom operator is a phone
number you previously programmed or the default selection.
NOTE: If a custom operator is not available, you will hear a message to that effect.
5. Do one of the following:
•
Press 1 to change your custom operator number, see step 6.
•
Press 2 to restore the default custom operator, see step 7.
•
Press * to return to the voice mail main menu, see step 8.
6. If you pressed 1, enter your custom operator number, press # and listen to
the confirmation announcement.
7. If you pressed 2, listen to the announcement that your default custom
operator has been restored.
8. If you pressed *, listen to the voice mail main menu.
NOTE: Entered numbers must match a valid dial plan (i.e., extensions must match your
4-, 5- or 6-digit plan, or a valid outside number, including all necessary access and
area code numbers), cannot be the same extension as your mail box, and you
must be able to dial the number entered from your phone. You will receive an error
message if you enter an invalid number or are not allowed to enter a long distance
number as your custom operator.
Linksys SPA-941 Telephone User Guide