Moving Your Telephone - Linksys SPA-941 User Manual

Moving Your Telephone

Linksys SPA-941 Telephone User Guide
620-05600390
Features
Scroll Key and "More" Key
Voice Mail
Hold
Settings
Mute
Volume
Headset
Speakerphone
Numeric Keypad
Before moving your telephone, you should check with your system administrator to
make sure that there is power for the telephone at the new location. You need a
power adapter for your phone at the new location as well.
To move your phone, follow these steps:
1. Unplug the telephone from the LAN connection jack and the power adapter
from the wall.
2. Take the telephone to the new location.
3. Plug the telephone into the LAN connection jack and the power adapter into
a wall outlet.
4. Watch to ensure that the phone registers and boots up properly. If it does not,
contact your system administrator.
Descriptions
The buttons allow the user to scroll up and down menu
items on the display. Pressing the right side of the
button provides "More" information/additional choices
for the menu options shown on the display
Acts as a speed dial to the user's voice mail.
Places the call on Hold. The Line button for the call that
is on hold will be flashing red while the call is on hold.
To resume the held call, press the blinking Line button.
Allows user to access menu options for viewing and
modifying the phone configuration.
Mutes the active audio input/microphone so that the
called party cannot hear local audio. The Mute button
will light red when the call is muted.
Allows the user to adjust the ringer, handset, headset
and speaker volume.
This button toggles the headset function on and off and
takes the phone offhook or hangs up the phone. The
button turns green when the headset is being used.
Turns on and off the speakerphone and takes the
phone offhook or hangs up the phone. The button turns
green when the speakerphone is being used.
Press the keypad buttons to dial a phone number.
Your Linksys SPA-941 Telephone
In This Manual
3