Cleaning Between The Outer And Inner Door Glass; To Remove The Outer Glass; To Replace The Outer Glass - Zanussi ZDQ 695 Instruction Booklet

Built-in electric multifunction double oven zdq 695
Hide thumbs Also See for ZDQ 695:
Table of Contents

Advertisement

CLEANING BETWEEN THE OUTER AND
INNER DOOR GLASS
The outer door glass is removable for cleaning.

TO REMOVE THE OUTER GLASS

1.
Open the oven door slightly to gain access to
the two cross head screws on the top of the
oven door.
2.
Loosen the two screws using a Pozidrive
screwdriver.
3.
Hold the door glass securely in place with one
hand before removing the screws completely
with the other hand.
4.
Using both hands, gently tilt the top of the door
glass towards you, lift slightly to disengage the
locators from the two bottom brackets.
door will remain in a parked position at an angle
of approximately 30°.
5.
Clean the outer and inner glass using hot soapy
water or Hob Brite may be used with care. Do
not use Hob Brite on the Stainless Steel or
painted finishes. Do not try to clean the foil
which is inside the door. The foil is there to help
keep the door cool, if it is damaged it will not
work. Ensure that all parts are well rinsed and
thoroughly dried before attempting to replace
the outer door.
If the door glass panel becomes chipped or
has deep scratches the glass will be
weakened and must be replaced to prevent
the possibility of the panel shattering.
Please contact your local Service Centre
who will be pleased to advise further.

TO REPLACE THE OUTER GLASS

1. Open the oven door with care and place in the
park position at an angle of approximately 30°.
2. Holding the oven glass with both hands, gently
place the locators into the holes of the brackets
at the bottom of the oven door.
3. Push the top of the oven glass towards the oven
door ensuring the screw location holes line up.
4. Ensure the trim is correctly positioned on the top
oven / grill door.
5. Hold the glass in place at the top of the door.
Insert the cross head screws into the location
holes. Give the screws one turn to ensure the
glass is secure.
6. Tighten the screws positively with the Pozidrive
screwdriver before closing the oven door.
Do not attempt to use the oven without the
glass being in place.
The
33
Grill Door Trim

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents