Please read these instructions completely before operating your unit. This booklet gives instructions for the operation of the Nady VR-3U wireless system which consists of a wireless receiver, an audio cord to connect the receiver to your camcorder, and a wireless...
Audio mute switch allows convenient portable receiver audio muting with the transmitter on • The Nady VR-3U UHF-3 Series Camera • Low-battery LED flashes once for unit on; Mount UHF Wireless System includes a lights solid red for low-battery alert VR-3U single-channel receiver and choice •...
Quick User Controls Guide Vr-3u receiver VOLUME/ON-OFF Controls the audio output level and turns the unit’s power on/off AUDIO OUT JACK For connection to camera or mixer input RF/LOW BATTERY LED Bi-color: (Green) TX signal received; (Red) Low-Battery ANTENNA Soft-wire,...
Page 5
uH-3 Handheld Mic Transmitter 13. INPUT VOLUME User adjustable input level trim-pot 14. INTEGRAL ANTENNA Built-In antenna 15. MIC BALL Windscreen 16. BATTERY COVER Unscrew to insert two AA alkaline batteries 17. BATTERY COMPARTMENT Holds two AA alkaline batteries 18. Two AA ALKALINE BATTERIES 19.
Page 6
Quick User Controls Guide uB-3 Bodypack Transmitter (lT/HM) 23. LATCHING BATTERY DOOR Open to 28. POWER ON/LOW BATTERY LED (Green) Indicates insert two AA alkaline batteries TX is ON; (Orange) indicates Low-Battery 24. BATTERY COMPARTMENT Holds two 29. ON/OFF SWITCH Power switch to turn AA alkaline batteries transmitter on/off 25.
Note: Observe care in selecting P.A. volume, your headphones into the camcorder, you transmitter location and speaker placement so may need to make a simple adjustment on that acoustic feedback (howling or screeching) the VR-3U receiver. If the sound you hear is will be avoided.
The UB-3 is provided with a 3.5 mm the auDIO MuTe On (27) to the On position. lOCKInG JaCK (26) for connecting the Adjust the VOluMe/On–OFF (1) of the VR-3U audio input selected. Connect either the receiver as per Monitoring through the HeaDWOrn MIC (35) or laValIer/laPel Camcorder.
U.S.A. off, you must replace the receiver and transmitter to a different channel. Note: The VR-3U’s reCeIVeD SIGnal (3) icon indicates good signal strength in operation with Please note that wireless frequencies are the transmitter on, but with the transmitter off shared with other radio services.
For service of a unit under warranty, please follow the instructions in the following section. Outside the u.S For service or warranty matters please contact the Nady distributor in your country through the dealer/store from which you purchased this product.
2) Send the unit back to Nady Systems, 6701 Shellmound Street, Emeryville, CA, 94608, freight pre-paid. You must include proof of date and place of purchase (i.e., photocopy of your bill of sale) or Nady cannot be responsible for repair or replacement. Nady Systems, Inc. will not repair, nor be held responsible, for any units returned without proper identification, return address, and RA number clearly marked on the package.
Need help?
Do you have a question about the VR-3U and is the answer not in the manual?
Questions and answers