Engine Shut-Off Switch; Start Switch - Yamaha FX High Output WaveRunner 2004 Owner's/Operator's Manual

EJU10160

Engine shut-off switch

Insert the clip 1, on the end of the engine
shut-off cord 2, under the engine shut-off
switch 3 (black button). The engine will stop
automatically when the clip is removed from
the switch, such as if the operator falls off
the watercraft.
WARNING
@
G Always attach the engine shut-off cord
to your wrist and the clip to the engine
shut-off switch BEFORE starting the
engine.
G
To prevent accidental starting of the
engine or unauthorized use by chil-
dren or others, always remove the clip
from the shut-off switch when the
engine is not running.
@
EJU20710

Start switch

Push the start switch 1 (green button) to
start the engine.
NOTE:
@
G
The engine will not start when the clip is
removed from the engine shut-off switch.
G The engine will not start if the lock mode
of the Yamaha Security System has been
selected. (See page 2-18 for Yamaha
Security System and low-RPM mode
selection procedures.)
@
2-10
E