Control Function Operation; Watercraft Control Functions; Engine Stop Switch; Engine Shut-Off Switch - Yamaha WaveRunner EX 2023 Owner's/Operator's Manual

EJU31027

Watercraft control functions

EJU31154

Engine stop switch " "

The engine stop switch (red button) stops the
engine when the switch is pushed.
1 Engine stop switch
EJU31164

Engine shut-off switch "

The engine shut-off switch automatically
stops the engine when the clip, on the end of
the engine shut-off cord (lanyard), is removed
from the switch, such as if the operator falls
off the watercraft.
Insert the clip under the engine shut-off
switch before starting the engine.
1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
When the engine is not running, remove the
clip from the engine shut-off switch to pre-
vent accidental starting or unauthorized op-
eration by children or others.

Control function operation

1
"
1
2
3
EJU44350

Start switch "

ECJ01311
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start
in 5 seconds, release the start switch, wait 15
seconds, and then try again. NOTICE: Never
push the start switch while the engine is
running. Do not operate the start switch
for more than 5 seconds, otherwise the
battery will be discharged and the engine
will not start. Also, the starter motor could
be damaged.
[ECJ01041]
1 Start switch
"
1
31