Table of Contents
Advertisement
A
B
3. Remove the dipstick and check that the oil is between
the upper and lower levels. If not, add oil to the upper
level.
2 Upper level
3 Lower level
Drive chain oil:API GL-3
SAE 75 or 80
È For models without reverse transmissions
(RX10/RX10S/RX10M/RX10MS)
É For models with reverse transmissions
(RX10R/RX10RS)
CAUTION :
@
Make sure that no foreign material enters the drive
chain housing.
@
4. Install the dipstick and align the notch 4 of the dip-
stick handle with the projection 5 of the drive chain
housing.
Chain tension adjustment
1. Loosen the chain adjuster locknut.
2. Turn the adjuster bolt clockwise until it is finger tight.
3. Hold the adjuster bolt in place while tightening the
chain adjuster locknut.
1 Chain adjuster locknut
2 Adjuster bolt
8-18
Advertisement
Table of Contents
