PERIODIC MAINTENANCE AND MINOR REPAIR
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
6
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
Replacing a turn signal light
bulb
1. Remove the turn signal lens by re-
moving the screws.
1. Screw
2. Remove the defective bulb by
ECA10680
pushing it in and turning it counter-
clockwise.
6-34
EAU24210
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
ECA10680