Replacing The Tail/Brake Light Bulb - Yamaha VIRAGO XV250V Owner's Manual

WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
PERIODIC MAINTENANCE AND MINOR REPAIR
EWA10790
1. Do not touch the glass part of the bulb.
ECA10660
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
1. Screw
2. Remove the defective bulb by
6-33
removing the screws.
pushing it in and turning it counter-
clockwise.
EAU24131
6