Yamaha VIRAGO XV250V Owner's Manual page 32

PRE-OPERATION CHECKS
ITEM
Drive chain
Wheels and tires
Brake and shift pedals
4
Brake and clutch levers
Sidestand
Chassis fasteners
Instruments, lights, signals
and switches
Sidestand switch
Battery
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
• Check fluid level.
• Fill with distilled water if necessary.
CHECKS
4-3
PAGE
6-23, 6-25
6-15, 6-17
6-27
6-27
6-27
—
—
3-10
6-30