Wheel Installation - Yamaha KODIAK 400 Owner's Manual

EBU01121

Wheel installation

1. Install the wheel and the nuts.
NOTE:
_
Tapered nuts are used for both the front
G
and rear wheels. Install the nut with its ta-
pered side towards the wheel.
G The arrow mark
toward the rotating direction of the wheel.
_
1. Arrow mark
on the tire must point
2. Lower the ATV so that the wheel is on the
ground.
1. Tapered nut
3. Tighten the wheel nuts to the specified
torque.
Wheel nut torque:
Front: 55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear: 55 Nm (5.5 m·kgf, 40 ft·lbf)
8-49