EBU10020
Auxiliary DC jack
The auxiliary DC jack is located at the front
right side of the ATV. The auxiliary DC jack
can be used for suitable work lights, radios,
etc. The auxiliary DC jack should only be used
when the engine is running.
1. Set the light switch to "OFF".
1. Auxiliary DC jack cap
2. Start the engine. (See pages 6-1–6-3.)
3. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
Maximum rated capacity for the auxiliary
DC jack:
DC 12 V, 120 W (10 A)
4. When the auxiliary DC jack is not being
used, cover it with the cap.
CAUTION:
_
G
Do not use accessories requiring
more than the above maximum capac-
ity. This may overload the circuit and
cause the fuse to blow.
If accessories are used without the
G
engine running or with the headlights
turned on, the battery will lose its
charge and engine starting may be-
come difficult.
G
Do not use an automotive cigarette
lighter or other accessories with a
plug that gets hot because the jack
can be damaged.
_
4-21