Yamaha KODIAK 400 Owner's Manual page 121

3. Remove the quick fasteners and pull up-
ward.
1. Quick fastener (× 2) 2. Panel C
To install
1. Place the panel in the original position
and install the quick fasteners.
2. Install the bolts at the bottom of the fend-
ers.
3. Install the front carrier by installing the
carrier bolts, and then tighten them to the
specified torque.
Tightening torque:
Carrier bolt:
34 Nm (3.4 m·kgf, 25 ft·lbf)
8-10