Yamaha KODIAK 400 Owner's Manual page 136

1. Place the ATV on a level surface.
2. Remove panels E and F. (See page 8-11
for panel removal and installation proce-
dures.)
3. Place a container under the engine, and
then remove the coolant drain bolt. (Use
a trough or a similar object as shown to
prevent coolant from spilling on the foot-
rest.)
1. Coolant drain bolt
1. Trough
4. Remove the front carrier and panel C.
(See pages 8-9–8-10 for removal and in-
stallation procedures.)
8-25