Advertisement
Steam Iron SI-4016, SI-4020, SI-4022,
SI-4024
This appliance is intended for ironing of different fabrics
and for household use only.
Power supply: 220-240 V, ~50Hz.
Power:
SI-4016 —1600 W;
SI-4020 — 2000 W;
SI-4022, SI-4024 — 2200 W.
Water tank: 300 ml for SI-4016, SI-4020, SI-4022 models;
250 ml for SI-4024 model.
Max. Heating: 200°C.
Auto stop:
For safety reasons, your iron will automatically stop heating if
it's left:
- upright for 8-10 minutes, or
- flat for 30-35 seconds.
SAFETY MEASURES
When using your appliance, the following basic
safety precautions should always be followed:
! To avoid electric shocks, do not immerse the
appliance, plug or power cord in water
or any other liquids. Do not place the appli-
ance where it could come into contact with wa-
ter or other liquids. Do not use the machine again
until it has been serviced by an authorized
service center.
! Do not let children use the appliance without supervision.
! This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
! If the power cord plug does not fit to your wall socket,
consult a qualified electrician.
! Use of various adapters may result in damage to the
appliance and termination of warranty.
! Always supervise the appliance while in use.
! Always unplug before moving the appliance from one
place to another, cleaning and storing.
! Never pull the cord to disconnect the appliance, instead grasp
the plug and pull it to disconnect.
! Do not allow the cord or the machine itself to come in contact
with hot surfaces.
! Position the appliance and the cord so that nobody can acci-
dentally overturn it.
! Do not use the appliance if it has been dropped, or it has a
damaged power cord or plug. Do not modify or repair the
machine yourself.
! Do not dismantle the appliance as improper assembly might
result in an electric shock during the subsequent use of the
equipment.
4
Advertisement
