Coolant - Yamaha TEO'S XN125 Owner's Manual

5. Add the specified amount of the
recommended final gear oil, and
then install and tighten the oil filler
bolt.
Recommended final gear oil:
Engine oil SAE 10W30
(API SE)
Oil quantity:
0.15 L
WARNING
Make sure that no foreign material
6
enters the final gear case.
Make sure that no oil gets on the tire
or wheel.
6. Check the final gear case for oil
leakage. If oil is leaking, check for
the cause.
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
ZAUM0044
1. Maximum level mark
2. Minimum level mark

Coolant

EW000066
To check the coolant level
1. Place the
centerstand.
NOTE:
• The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
• Make sure that the scooter is
positioned straight up when
checking the coolant level. A slight
tilt to the side can result in a false
reading.
ZAUM0045
1. Coolant reservoir cap
EAU01587
2. Remove panel B. (See page 6-6
scooter on the
3. Check the coolant level in the
NOTE:
The coolant should be between the
minimum and maximum level marks.
4. If the coolant is at or below the mi-
6-13
1
for cover removal and installation
procedures.)
coolant reservoir.
nimum level mark, open the
reservoir cap, add coolant to the
maximum level mark, and then
close the reservoir cap.