Helmet Holder; Adjusting The Shock Absorber Assembly - Yamaha XT225R Owner's Manual

1
2
1. Projection
2. Seat holder
To install the seat
1. Insert the projection on the front
of the seat into the seat holder
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
3. Install the panels.
NOTE:
Make sure that the seat is properly
secured before riding.
INSTRUMENT AND CONTROL FUNCTIONS
1

1. Helmet holder

a. Unlock.
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, turn the
key to the original position, and then
remove it.
w
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.
3-9
Adjusting the shock
absorber assembly
This shock absorber assembly is
a
equipped
adjusting nut and a rebound damping
force adjusting dial.
cC
Never attempt to turn an adjusting
mechanism beyond the maximum
EAU00261
or minimum settings.
EW000030
EAU04848
with a spring preload
EC000015
3