Advanced Functions; Hold And Resume; Transfer; Direct Transfer - Snom 220 Manual

4.

Advanced Functions

Hold and Resume

When a call is in progress, pressing the flash key
(language dependent) puts the call on hold, i.e., the speech is set to
mute (neither party can hear the other).
Pressing the flash key again will resume the call. While a call is on hold,
you can establish another call by dialing the desired number.
When more than one call is on hold the following window appears.
Select the party you wish to talk to with the keys
ENTER/Flash key to get connected.
Key mapping:
CANCEL
,
*,#,digits
,

Transfer

Direct Transfer

During a call press the transfer key
hold, then dial the number the call is to be directly transferred to.
The call being held is terminated.
Resumes the call being held.
Transfers the call being held.
Can be used to initiate another call.
Handsfree mode on/off.
/ . Press the
to put the connected party on
or
27