Setting The Time And Date - Accu-Chek Aviva Owner's Booklet

Setting the Time and Date

1
Turn the meter on.
The flashing test strip
symbol appears on the
display.
Setting the Beeper On or OFF
nOTE
The beeper prompts you:
• to apply blood or control solution to the test strip.
• when enough blood or control solution is drawn into the test strip.
• when the blood glucose or control test is complete.
• when a button is pressed.
• when it is time to perform a test (if you set the test reminders).
• if an error occurred while performing a blood glucose or control test (even if the beeper is off, it still beeps
for an error).
Meter Memory, Setup, and Data Transfer
2
Press and hold until
set‑up appears on the
display.
The hour flashes.
3
Press and release or
to decrease or increase
the hour.
Press and release to set
the hour.
The minutes flash.
4
Repeat step 3 to set
minutes, am/pm, month,
day, and year.
To set up more options,
press and release .
To exit, press and hold
until the flashing test strip
symbol appears on the
display.
29
5