Accu-Chek Aviva Owner's Booklet page 12

Your new System
adjusting the Time and Date (First Time Use)
The meter is preset with the time and date which may need to be adjusted to the local time zone. It is
important to set the correct time and date in the meter to use the meter memory or to transfer results to a
computer.
1
Turn the meter on.
The time and date appear
on the display. Set‑up and
the hour flash. If the time
and date are correct, press
and hold to exit.
nOTE
• After you change the battery, the meter automatically prompts a time and date confirmation when it is
turned on.
• To set more options on the meter, see Chapter 5, Meter Memory, Setup, and Data Transfer.
10
2
Press and release or
to decrease or increase
the hour.
Press and release to set
the hour.
The minutes flash.
3
Repeat step 2 to set
minutes, am/pm, month,
day, and year.
The flashing field is the
one that is being changed.
4
Press and hold until the
flashing test strip symbol
appears on the display.
The time and date are
now set.