Replacing The Oven Light; Technical Data; Heating Elements - Zanussi ZOU 345 Instruction Booklet

Built-under oven
Table of Contents

Advertisement

Technical Data

Dimension of the oven
recess
Height
Width
Depth
Dimensions of the oven
cavity
Height
Width
Depth
Capacity
Oven thermostat regulation: from 50°C up
to 230°C

Heating elements

Top Heating Element
Bottom Heating Element
Top + Bottom Heating Elements 1800 W
Grill element
Oven lamp
Turnspit
Maximum Power absorbed:
Operating Voltage (50 Hz) 230 V - 400 V

Replacing the oven light

Disconnect the appliance from its power
supply point. Push in and unscrew the glass
cap (Fig. 9). Unscrew the light bulb and
replace it with a new heat-proof bulb (300
°C) having the following features: - Operative
tension: 230 V (50 Hz); - Power: 15 W; -
Fitting: E 14. Reconnect the appliance.
This appliance can be connected to
variuos cast iron or ceramic hobs:
593 mm
Traditional hobs
Type: ZME 2002 V
560 mm
Maximum powerabsorbed
550 mm
Power supply voltage (50Hz)
Ceramic hobs
Type: ZGRX 2504-7
Maximum powerabsorbed
Power supply voltage (50 Hz)
335 mm
Type: ZK 630 LX
405 mm
Maximum powerabsorbed
400 mm
Power supply voltage (50 Hz)
56 l
Nominal heating power
Oven with traditional hob
Oven with ceramic hob
ZGRX 2540-7
Oven with ceramic hob
ZK 630 LX
800 W
1000 W
1650 W
-
73/23 - 90/683 (Low Voltage Directive);
15 W
-
89/336 (Electromagnetical Compatibility
4 W
Directive);
1815 W
-
93/68 (General Directives)
and subsequent modifications.
Fig. 9
This appliance complies with the
following
E.E.C. Directives:
5,5 kW
230 V
5,8 kW
230 V
7,6 kW
230 V
7,315 kW
7,615 kW
9,415 kW
61

Advertisement

Table of Contents
loading

Table of Contents