Building-In - Zanussi ZOU 345 Instruction Booklet

Building-in

To ensure correct operation of the built-in
assembly, the kitchen cabinet and the
recess for the built-in appliance must have
suitable dimensions.
When the appliance is fitted-in, there must
be no open spaces left and it must be
closed on all sides by the kitchen furniture
to prevent the possibility of inadvertently
touching "live" (current carrying) parts of the
oven.
All parts ensuring such a protection,
including any covering panel (for instance,
if the appliance is installed at the end or at
the beginning of a kitchen counter) must be
fastened in such a way as to prevent removal
of the same without the aid of some tool.
This appliance can be placed with its back
and with one side close to appliances or
walls of higher height. The other side,
instead, must be placed close to furniture
or appliances, having the same height.
Overall oven dimensions
(Fig. 12)
Building-in under a kitchen
counter
The recess must have the dimensions
shown in Fig. 13.
Before carrying out the building-in of the
oven, connect it to the hob (see
corresponding chapter); then recess
completely the oven under the counter; open
the oven door and secure the oven to the
kitchen cabinet with four wood screws which
are to fit exactly into the holes provided for
the purpose on the oven frame (Fig.14).
64
Fig. 12
FO 2562
Fig. 14
Fig. 13