Safety Thermostat - Zanussi ZOU 655 Instruction Booklet

control knob and the thermostat control knob
on the required settings. Turn the timer knob
to maximum time position ("90"), then turn
it back to set the required cooking time.
When the cooking time is over, an acoustic
alarm will sound and the oven will switch off
automatically. Turn the timer knob on
set the oven on manual operation.
Hotplate control knobs
The Control Knobs for the hotplates (Fig. 4) can
be found on the oven control panel. The energy
regulator of the hotplates can be set by means
of a 7-position control knob:
0 = Off
1 = Minimum
3 = Maximum
The intermediate positions give an increasing
heating power.
Carefully supervise cookings with oil
or fats, since these types of food can
result in a fire, when over-heated.
Oven thermostat control light
This light goes off when the oven heats up to
the temperature set and comes on again every
time the thermostat cuts in to stabilize
temperature.
Operating control light
It indicates that one or more of the heating
elements are turned on.

Safety thermostat

In order to avoid excessive overheating due to
incorrect use of the appliance or else to a faulty
component, the oven is equipped with a safety
thermostat which cuts off the power supply if
necessary. Operation is restored automatically
when the oven temperature decreases to normal
values. Therefore, if the thermostat cuts in
because you have not been using the appliance
correctly, the oven can be used again simply
by waiting for the appliance to cool down. If,
instead, the thermostat cuts in because of a
faulty component, you should call the Service
Department.
24
to
Fig. 4