Controls; Oven Function Control Knob; Thermostat Control Knob; Safety Thermostat - Zanussi ZOU 133 User Manual

Controls

Oven Function Control Knob

0 The oven is off
Oven light - The oven light will be on
without any cooking function.
Conventional cooking - The heat comes
from both the top and bottom element,
ensuring even heating inside the oven.
Fan cooking - This allows you to roast or
roast and bake simoultaneously using any
shelf, without flavour transference.
Grill - The grill element will be on
Mains on Indicator
The mains on light will come on when the oven
function control knob is set.

Thermostat Control Knob

Turn the thermostat control knob anti-clockwise
to select temperatures between 50°C and 250°C.
Thermostat Control Indicator
The thermostat control indicator will come on
when the thermostat control knob is turned. The
indicator will remain on until the correct temperature
is reached. It will then cycle on and off to show the
temperature is being maintained.

Safety Thermostat

To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to
incorrect use of the appliance, it is enough to
remedy the error after the oven has cooled down;
if on the other hand, the thermostat triggers
because of a defective component, please contact
Customer Service.
The cooling fan
The oven is provided with a cooling fan, meant to
keep the front panel, the knobs and the oven door
handle cool.The fan switches on automatically
when the oven is activated. Warm air is blown out
through the aperture near the oven door handle.
The fan switches off when, after cooking, the oven
function control knob is set to OFF position
Electrolux
0
0
33