Package Contents; Product Features - Tripp Lite B126-2A1 Owner's Manual

Package Contents

• B126-2A1 Kit or B126-2A0 Receiver Unit
• External Power Supply
(Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
• Mounting Hardware
• Screwdriver for Equalization Adjustment
• Owner's Manual

Product Features

• Extends an HDMI signal to 2 monitors up to 200 ft. from the source
over a single Cat5e/6 cable.
• A B126-002 or B126-004 extender/splitter transmitter unit is required
for use with the B126-1A0 1x2 receiver unit.
• Extends a 1080p (60Hz) signal up to 150 ft. from the source using
Cat6 cabling, or up to 125 ft. using Cat5 cabling.
• Extends a 1080i (60Hz) signal up to 200 ft. from the source using
Cat6 cabling, or up to 175 ft. using Cat5 cabling.
• Use 24 AWG, solid wire Cat5e/6 cable, such as Tripp Lite's N202-Series,
to achieve maximum distance and resolution.
• Further expand the range and number of monitors by adding B126-110
repeater units.
• Add up to three repeaters on each Cat5e/6 channel, for a total of 4
displays per channel (An Active remote receiver should be the last unit
in a channel).
• A 1080p (60Hz) signal can be extended up to 125 ft. for each repeater
added into a channel (or up to 175 ft, for a 1080i (60Hz) signal when
using either Cat5e or Cat6 cabling).
• Supports 24-bit True Color (8-bits per channel).
• Built-in equalization control to adjust the video image.
13-08-043 93-32D0.indd 2
2
8/28/2013 2:17:35 PM