Table of Contents
Advertisement
Notes:
1. Test to make sure that the entire installation works properly before
2. The diagram below shows the maximum extension distance when using
3. The B126-002 and B126-004 are set to transmit a stereo audio
4. The diagram below shows the B126-004 transmitter unit. Installation
5. Although the installation instructions below mention the B126-2A0
13-08-043 93-32D0.indd 13
Extender/Splitter with
Remote/Repeater Installation
running cables through ceilings/walls.
either Cat5e or Cat6 cabling. 24 AWG, solid wire Cat5e/6 cable, such
as Tripp Lite's N202-Series, is required to achieve maximum distance
and resolution.
signal by default. Press the Audio button on the transmitter unit to
switch to 7.1-channel surround sound audio. (7.1-channel surround
sound signal will be Multi-Channel or PCM)
is the same for the B126-002, except that there are only two output
ports and no local monitor port.
1x2 receiver unit only, Tripp Lite offers two additional active receivers
that can be used in the event that only one monitor is needed at the
end of a repeater chain: B126-1A0 and B126-1A0-WP-1.
13
8/28/2013 2:17:40 PM
Advertisement
Table of Contents
