TOHATSU MFS 30B Owner's Manual page 58

58 INSPECTION AND MAINTENANCE
Replacing gear oil
!
1
Be sure that outboard motor is
secured to transom or service stand,
or accidental drop or fall of outboard
2
motor could lead to severe personal
injury.
Be sure to lock outboard motor if
3
it is tilted up, or accidental fall of
outboard motor could lead to severe
personal injury.
Do not go under outboard motor
4
tilted up and locked, or accidental
fall of outboard motor could lead to
severe personal injury.
5
Remove the oil plugs (upper and
lower), and completely drain the
6
gear oil into a pan.
7
8
9
10
Insert the oil tube nozzle into the
lower oil plug hole, and fill with
11
gear oil by squeezing the oil tube
!
12
Do not reuse oil plug gasket. Always
use new gasket and tighten oil plug
13
properly to prevent entry of water into
lower unit.
14
�������
�������
until oil flows out of the upper plug
hole.
Install the upper oil plug, and then
remove oil tube nozzle and install
the lower oil plug.
Notes
If water in the oil, giving it a milky
colored appearance. Contact your
dealer.
Notes
Use genuine gear oil or the
recommended one (API GL-5: SAE
#80 to #90).
Required volume: approx. 280 ml.