Break-In - TOHATSU MFS 6B Owner's Manual

16
PRE-OPERATING PREPARATIONS

2. Break-in

Your new outboard motor and lower
1 unit require break-in for the moving
c o m p o n e n t s a c c o r d i n g t o t h e
conditions described in the following
2
time table.
3
4
5
6
Throttle Position
7
Speed
8
Note
9
Proper break-in allows outboard
motor to deliver it full performance for
10
longer service life.
11
12
13
14
1-10min 10min-2hrs
Less than 1/2
Idle
throttle
Approx.
3,000 rpm max
�������
!
Operating the outboard motor without
break-in can shorten service life of the
product.
If any abnormality is experienced
during the break-in:
Discontinue the operation
immediately.
Have the dealer check the product
and take proper action(s) if
necessary.
2-3hrs 3-10hrs
Less than 3/4
3/4 throttle
throttle
Approx.
Full throttle run 4,000 rpm.
Full throttle run
allowed for 1 min
every 10 min allowed for 2 min
every 10 min
������
!
Do not operate the outboard motor
in closed area or area with no forced
ventilation.
Exhaust gas emitted by this outboard
motor contains carbon monoxide that
will cause death if inhaled continuously.
Inhaling the gas initially causes
symptoms such as feeling of sickness,
drowsiness and headache.
During operation of the outboard motor:
Keep peripheral area well ventilated.
Always attempt to stay on the
windward side of emission.
After 10hrs
Full throttle
available