Safety Thermostat - Zanussi ZOB 668 Instruction Booklet

Oven thermostat control
light
This light goes off when the oven heats up
to the temperature set and comes on again
every time the thermostat cuts in to stabilize
temperature.
Operating control light
It indicates that one or more of the heating
elements are turned on.

Safety thermostat

In order to avoid excessive overheating due
to incorrect use of the appliance or else to a
faulty component, the oven is equipped with
a safety thermostat which cuts off the power
supply if necessary. Operation is restored
automatically when the oven temperature
decreases to normal values. Therefore, if the
thermostat cuts in because you have not
been using the appliance correctly, the oven
can be used again simply by waiting for the
appliance to cool down. If, instead, the
thermostat cuts in because of a faulty
component, you should call the Service
Department.
The cooling fan for the
controls (in model ZOB 668
only)
The cooling fan is designed to cool the
walls of the oven and the components of
the oven itself. The fan switches on
automatically after a few minutes of
cooking. Warm air is blown out through
the aperture near the oven door handle.
When the oven is switched off, the fan will
remain on in order to cool the oven and
kitchen cabinets properly, after which it
switches off automatically.
30