End Of Cooking" Function - Zanussi ZOB 668 Instruction Booklet

Hide thumbs Also See for ZOB 668:
Table of Contents

Advertisement

lamp
will start flashing. Then, proceed as follows:
To set the duration time:
1. press button " " or " ".
2. After the setting is carried out, wait for 5 seconds:
the "Cooking Duration" pilot lamp
and the display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: when doing this operation, the oven will be
operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero at
the end of the cooking time.
To cancel the duration time:
1. Press button
Duration" function. The relevant pilot lamp
and the display will show the remaining cooking time.
2. Press button " " until the display shows "0:00". After
5 seconds the pilot lamp will go out and the display
will revert to the time of day.

"End of cooking" function

Thanks to this function, you can set the oven to switch off
automatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
repeatedly to select the "End of cooking" function. The
relevant pilot lamp
follows:
To set the End of cooking time:
1. press button " " or " ".
2. After the setting is carried out, wait for 5 seconds:
the "End of cooking" pilot lamp
the display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: when doing this operation, the oven will be
operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero when
cooking is over.
32
repeatedly to select the "Cooking
will start flashing. Then, proceed as
will come on
will flash
will come on and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zob 666 q

Table of Contents