Table of Contents
Advertisement
S
S
UPER
ERVER 6016T-GTF/GIBXF/GIBQF User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 6016T-GTF/GIBXF/GIBQF is one X8DTT-F/X8DTT-
IBXF/X8DTT-IBQF dual processor serverboards, which is based on Intel's 5520
(North Bridge) + ICH10R (South Bridge) chipset.
Below are the main features of the serverboards.
Processors
The X8DTT-F/X8DTT-IBXF/X8DTT-IBQF supports two Intel® 5500 Series proces-
sors in LGA1366 sockets. Please refer to our web site for a complete listing of
supported processors (www.supermicro.com).
Memory
The X8DTT-F/X8DTT-IBXF/X8DTT-IBQF has twelve DIMM sockets that can sup-
port up to 48 GB of registered ECC DDR3-1333/1066/800 SDRAM (192 GB for
the system). See Chapter 5 Section 6 for more details on installing memory into
the system.
Serial ATA
The South Bridge (ICH10R) of the chipset includes a Serial ATA controller for six
Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane
that provides power, bus termination and confi guration settings. RAID 0, 1, 10 and
5 are supported. Refer to the support area of our web site for procedures on set-
ting up RAID on your system.
PCI Expansion Slots
The X8DTT-F/X8DTT-IBXF/X8DTT-IBQF board has one PCI Express 2.0 x16 slot. In
the 6016T-GTF/IBXF/IBQF server confi guration, riser cards have been pre-installed
to support low-profi le add-on cards.
Ethernet Ports
An Intel® network controller is integrated into each of the serverboards to support
two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).
1-2
Advertisement
Table of Contents
