Thermostat Control Knob; Safety Thermostat; The Cooling Fan - Zanussi ZOB 592 User Information

8 electrolux
Mains on Indicator
The mains on light will come on when the oven
function control knob is set.

Thermostat Control Knob

Turn the thermostat control knob anti-clockwise to
select temperatures between 50°C and 250°.
Thermostat Control Indicator
The thermostat control indicator will come on when
the thermostat control knob is turned. The indicator
will remain on until the correct temperature is
reached. It will then cycle on and off to show the
temperature is being maintained.

Safety Thermostat

To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.

The cooling fan

The cooling fan is designed to cool the the oven
and the control panel. The fan switches on
automatically after a few minutes of cooking. Warm
air is blown out through the aperture near the
oven door handle. When the oven is switched off,
the fan may run on after the oven is switched off to
keep the controls cool. This is quite normal.
The action of the cooling fan will depend
on how long the oven has been used and
at what temperature. It may not switch in at
all at lower temperature settings nor run
on where the oven has only been used
for a short time.
8