Controls; Oven Function Control Knob; Thermostat Control Knob - Zanussi ZOU 363 User Manual

Controls

Push-Pull control knobs
Some models are provided with push-pull control knobs.
These knobs can be completely sunken inside the control
panel when the oven is not working.

Oven Function Control Knob

0
The oven is off
Conventional cooking - The heat comes from both
the top and bottom element, ensuring even heating
inside the oven
Top heating element - The heat comes from the top
of the oven only
Bottom heating element - The heat comes from the
bottom of the oven only
Grill - The grill element will be on.
Fan cooking - This allows you to roast or roast
and bake simoultaneously using any shelf, without
flavour transference.
Defrost Setting - This setting is intended to assist in
thawing of frozen food.
Mains on Indicator
The mains on light will come on when the oven
function control knob is set.

Thermostat Control Knob

Turn the thermostat control knob anti-clockwise to
select temperatures between 50°C and 250°C.
Thermostat Control Indicator
The thermostat control indicator will come on when the
thermostat control knob is turned. The indicator will remain
on until the correct temperature is reached. It will then cycle
on and off to show the temperature is being maintained.
Hotplate control knobs
The control knobs for the hotplates can be found on the oven
control panel. The energy regulator of the hotplates can be set
by means of a 9-position control knob:
0 = OFF
1 = Minimum
9 = Maximum
The intermediate positions give an increasing heating power.
21