Table of Contents
Advertisement
SPECIFICATIONS
Machine specifications / copier specifications
(Continued)
Interface port
Required power supply
Power consumption
Dimensions
Weight
Overall dimensions
* Type A connectors are located on the front and back right of the machine (two
connectors).
Continuous copying speeds*
Copy ratio
Copy mode
8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13"
A4
8-1/2" x 11", 7-1/4" x 10-1/2",
5-1/2" x 8-1/2", B5, A5, 16K
* Copy speed during output of the second copy and following copies when performing
continuous one-sided copying of the same page (excluding offset output) using plain
one-sided paper from a tray other than the bypass tray.
42
LAN connectivity: 10Base-T / 100Base-TX /
USB connectivity: Type A connector supports USB 2.0
Local voltage ±10% (For the power supply
requirements, see the name plate in the lower corner of
the left side of the machine.)
1.84 kW
560 mm (W) x 494 mm (D) x 789 mm (H)
(22-3/64" (W) x 19-29/64" (D) x 31-1/16" (H))
Approx. 53 kg (116.8 lbs.)
1101 mm (W) x 494 mm (D) (43-11/32" (W) x 19-29/64"
(D)) (when bypass tray is extended)
100% / Reduced / Enlarged
Colour
32 copies/min.
38 copies/min.
40 copies/min.
1000Base-T
(Hi speed)*
Compatibility requirements of USB 2.0
Disk Format: FAT
Type B connector supports USB 2.0
(Hi speed)
B/W
32 copies/min.
38 copies/min.
40 copies/min.
Advertisement
Table of Contents
