Table of Contents
Advertisement
PART NAMES AND FUNCTIONS
(1) Automatic document feeder
This automatically feeds and
scans multiple originals. Both
sides of 2-sided originals can be
scanned at once.
(2) Original exit tray 1
Originals are delivered to this tray
after scanning.
(3) Operation panel
(4) Document feeder tray
Place the originals in this tray
when using the automatic
document feeder.
(5) Document glass
This is used to scan books and
other originals that cannot be
scanned using the automatic
document feeder.
(6) USB connector (type A)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB
memory or other USB device to
the machine.
(7) Finisher*
This can be used to staple output.
* Peripheral device. For more information, see "PERIPHERAL DEVICES" in
"Chapter 1 - BEFORE USING THE MACHINE" in the Operation Guide.
(12)
(13)
(1) (2) (3) (4)
(11)
(10)
(5)
(9)
(8)
(8) Tray 2/Tray 3/Tray 4 (500 sheet
paper feed unit is installed)*
This holds paper. Up to 500
sheets (80 g/m
paper can be loaded.
(9) Tray 1
Up to 500 sheets of paper (80 g/m
(21 lbs.)) can be loaded in each tray.
(10) Output tray (centre tray)
Copy jobs and print jobs are
delivered to this tray.
(When a finisher is installed, the
output tray (centre tray) cannot
be used.)
(11) Main power switch
This is used to power on the machine.
When using the fax or Internet
fax functions, keep this switch in
the "on" position.
(12) Keyboard
This is a keyboard that is
incorporated into the machine.
When not used, it can be stored
under the operation.
(13) Original exit tray 2
If originals are not delivered to
original exit tray 1 after scanning,
they are delivered to this tray.
(6)
(7)
2
(21 lbs.)) of
2
13
Advertisement
Table of Contents
