Using The Camera (Optional) - Motion Computing J3500 User Manual

Using the camera (optional)

You can use the built-in camera to take pictures. For more information about the camera,
see "Camera (optional)" on page 12.
To use the camera
1. Open Motion QuickNav. (See "Using Motion QuickNav" on page 30.)
2. Press the Camera button to activate the camera and open the viewfinder.
Note: If a picture is not taken after a short period, the viewfinder will automatically close.
If this occurs, repeat the steps.
3. Press the Camera button again to take a picture.
4. In the Pictures window, do one of the following:
•
To close the Pictures window, tap outside of the QuickNav window.
•
Pictures are automatically saved in the My Pictures folder, located in the My Documents
folder.
Camera light
32 Chapter 3
®
Camera lens
Using your Tablet PC
Camera button