Sharp AL-2050 Online Manual page 31

3 TROUBLESHOOTING
Troubleshooting
Problem
Printing is slow.
The printed image is light and
uneven.
The printed image is dirty.
CO NT E N TS
Simultaneous use of two or more application software programs.
→ Start printing after quitting all unused application software programs.
The paper is loaded so that printing takes place on the back side of the paper.
→ Some paper types have a front and back side. If the paper is loaded so that printing
takes place on the back side, toner will not adhere well to the paper and a good image
will not be obtained.
You are using paper that is outside the specified size and weight range.
→ Use copy paper within the specified range.
Paper is curled or damp.
→ Do not use curled or crimped paper. Replace with dry copy paper. During periods
when the machine is not used for a long time, remove the paper from the tray and
store it in a dark place in a bag to prevent moisture absorption.
You did not set sufficient margins in the paper settings of your application.
→ The top and bottom of the paper may be dirty if the margins are set outside of the
specified print quality area.
→ Set the margins in the software application within the specified print quality area.
I N D E X
Cause and solution
(part 3)
Page
-
Operation
Manual
Operation
Manual
-
-
31