Fitting The Printed Image To The Paper - Sharp AL-2050 Online Manual

1 PRINT

Fitting the Printed Image to the Paper

The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine.
Follow the steps shown below to use this function. The explanation below assumes that you intend to print an A4 size document on
A5 size paper.
☞
See Basic Printing for details on how to open the printer driver.
The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
Note
☞
Printing Multiple Pages on One Page
1
Click the "Paper" tab in the printer driver setup
screen.
2
Select the original size (A4) of the print image in
"Paper Size".
3
Check the "Fit To Page" box.
CO NT E N TS I N D E X
4
Select the actual size of paper to be used for
printing (A5).
The size of the printed image will be automatically
adjusted to match the paper loaded in the machine.
Paper Size: A4
Fit To Paper Size: A5
A4 size document
(Paper Size)
If "A3 [Fit to Page]", "B4 [Fit to Page]", or "Ledger [Fit to
Note
Page]" is selected, the print image is fit to the A4 size
even if "Fit to Page" is not selected.
A5 size paper
(Fit To Paper Size)
10