Yamaha 80-51065 Owner's Manual page 39

- The Ethernet connection speeds can be set when you
select "Yes", then press ENTER.
- As automatic detection is made tfactory preset
mode), this setting is not normally necessary. If a
situation occurs in which the Ethemet connel1:ion
rails, etc., change the setting and confirm if the
Ethenwt connection successfully wmks.
When the connection speed is set. select "Next",
then press ENTER.
@For testing the connection to the intemd, after
contimling the settings. press
<]J[>
to select 'Test",
then press ENTER.
- As a re.'iult of the test, if the intemd conm.,ction fails,
enter the setup values manually.
®
Press
<]/
C>
to selel1: "Complete", then pre.'iS
ENTER.
The operation procedure for Inputting
characters manually
"I~,t~~
- Numeric characters such as
If>
address can be
entered on the input screen either by selecting each
of the chamcters in the "Numeric" mode or using the
Number bulLons on tlle remote control.
CD
Press ENTER at the boxes in which characters are to
be entered, and the input screen will appear.
Selected by pressing f:j, /
\l
Selected by pressing
<J / f>
®
Press
6/
\7
to
select the desired input mode.
- When inputting the address of the proxy server;
., I ABC' (Alphabet/numeric character) I "Sign" /
"Edit"
Settings
- When inputting other values (IP address, l'Ie.):
"Numeric" I "Edit"
@
Pre.')s
<]/
C>
to selel1: a number/character, then press
ENTER.
@Repeat step 3 to display all of the desired character,""
numbers in the input field.
Example:
The screen for inputting numeric chamcters
Nots
Q
- Press RETURN tDeI.Char.) to delete a number!
character you have input.
1'0 change a nUlTlber/char<K.1:er you have input, press
B (Left) or C (Right) to select the number/character
you want to change, and press RETURN
(DeI.Char.). Then, press
<]/
C>
to select a new
number/chan\Cter you want to input, !md press
ENTER.
®
Press 0 (C.omplete) to fix the numbers which have
bl"Cn input.
®
Repeat step I to 5 to finish inputting all the required
ch~lC'al1:ers.
35
En
I