Cleaning Equipment - Siemens HM 442200 N Instruction Manual

Cleaning equipment

Exterior of the appliance
Enamel surfaces
Gas hob burners and grills
Knobs
Inside of the oven
36
Wipe with a cloth that has been dampened with hot water and
washing up liquid. Dry with a soft cloth.
Wipe with a cloth that has been dampened with hot water and
washing up liquid. Dry with a soft cloth.
Remove the grill and clean with washing up liquid, a sponge
and hot water.
Remove burner body and cover. Clean with sponge, washing up
liquid and hot water. Make sure that the gas outflow holes on
the burner body are clean and not blocked.
Spark plugs must be cleaned with a small, soft brush. The gas
burners will only work if the spark plugs are clean.
Food residue on the burners must be cleaned off with a cloth
that has been dampened with hot water and washing up liquid.
Only a small amount of water must be used. Water must not
reach the interior parts of the appliance. Make sure that the
spark plug hole is not blocked and is not damaged during
cleaning.
Dry all parts after cleaning and make sure that the burner body
and covers are fitted correctly. If they are fitted incorrectly,
igniting the burners will be difficult.
The burner cover is black enamel coated. This colour may
change over time due to high temperatures. This will not affect
the operation of the burners.
Refit the grill in its original location.
Do not remove the knobs for cleaning. Simply pull the knobs out
a little and clean away the food remains which have
accumulated underneath using a cloth that has been dampened
with hot water and washing up liquid.
The upper surfaces of the knobs must be cleaned with a cloth
that has been dampened with hot water and washing up liquid.
Wipe the inside of the oven with a cloth that has been
dampened with hot water and washing up liquid. Dry with a soft
cloth.
If the oven is very dirty: Use the oven cleaning equipment only
when the oven has cooled.