Cleaning Equipment - Siemens HM 744506N Instruction Manual

Cleaning equipment

Exterior of the appliance
Stainless steel surfaces
Gas hob burners and grills
Wipe the external surfaces of the appliance with a cloth that
has been dampened with hot water and washing up liquid.
Dry with a soft cloth.
Wipe with a cloth that has been dampened with water and
washing up liquid. Wipe the stainless steel surfaces in
horizontal strokes. Otherwise, they may become scratched.
Dry with a soft cloth.
Do not use corrosive cleaning equipment, hard foam rubber
or corrosive cleaning cloths.
You can polish the surfaces using stainless steel main
tenance equipment. Pay attention to the manufacturer's
instructions. You can obtain the equipment from our
after sales service.
Remove the grill and clean with washing up liquid, a sponge
and hot water.
Remove burner body and cover. Clean with a sponge,
washing up liquid and hot water. Make sure that the gas
outflow holes on the burner body are clean and are not
blocked.
Spark plugs must be cleaned with a small, soft brush.
Gas burners will only work if the spark plugs are clean.
Food residue on the burners must be cleaned using a cloth
that has been dampened with hot water and washing up
liquid. Only a small amount of water must be used. Water
must not reach the internal components in the appliance.
Make sure that the spark plug hole is not blocked and is not
damaged during cleaning.
Dry all the parts after cleaning them and check that the
burner body and covers are fitted correctly. If they are fitted
incorrectly, igniting the burners will be difficult.
The burner cover is black enamel coated. This colour may
change over time due to high temperatures. This will not
affect the operation of the burners.
Refit the grill in its original location.
39