Section 7 - Operating The Al010 Micro Scooter Lift - Harmar Mobility AL030 Installation Manual & Owner's Manual

Section 7 - Operating the AL010 Micro Scooter Lift

U P
D O
W N
O N
1
Insert Key and switch to "ON" position
Press down on Toggle switch momentarily.
3
Drive scooter onto platform as shown.
5
Raise platform until hold down foot depresses
scooter's deck or until lift's motor ratchets.
"PLATFORM KEEPER"
W E L
D E D
P L A T
T O
F O R
M
2
Once platform has been lowered at least an
inch, unfold the platform. Continue lowering
to the ground.
4
Raise hold down arm.
To remove the scooter and prepare the lift
for unloaded travel, follow above steps in
reverse order and reverse the direction
of the arrows.
Lift should be raised
with the platform folded
and until the lift's motor
ratchets. Verify that the
platform keeper has
engaged the platform's
pin.
R
E P E
M K E
F O R
P L A T
P L A T
F O R
M 's P
I N