Section 1 - Unpacking The Lift - Harmar Mobility AL030 Installation Manual & Owner's Manual

Section 1 - Unpacking the Lift

Your Universal Outside Lift was factory pre-assembled to require little assembly before installation.
Box contents should include:
LIFT BODY
HARDWARE PACK
AL030 - Manual Wheelchair Lift
Each AL010 is packaged standard with a standard Class 2 hitch adapter. Each AL030 is packaged with a standard Class 1
flat bar style hitch adapter and stabilizer. If a Class 2 or Class 3 hitch adapter or Swing Away option is required, separate
parts must be ordered. See Section 5 for installing a lift with the Swing Away option in this manual.
Be sure and check the contents of the box against the package check list to be sure that all parts are included with the lift
that are required for proper installation. If any parts are missing or if any damage is noted, immediately contact the distributor
from which you purchased your lift. DO NOT attempt to install or use the lift with any missing or damaged parts.
AL010 - Micro Scooter Lift
HITCH POST
HITCH ADAPTER
LIFT BODY
HARDWARE PACK
HITCH POST
and Stabilizer
CLASS 2
Hitch Adapter
OR
OPTIONAL
CLASS 3
"PLATFORM KEEPER"
L I F T
NOTE: The Platform will not be
allowed to unfold until the platform
has been lowered at least 1 inch.
OPTIONAL
CLASS 2
OR OR
W E L
D E D
P L A T O
T F O
R M
OPTIONAL
CLASS 3