Table of Contents
Advertisement
Available languages
Available languages
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
1
*
For KD-G510: Displayed only when
"L/O MODE" is set to "WOOFER"
(see page 21).
Ex.: When "TRE" is selected
2
Indication pattern changes as
you adjust the level.
Indication
To do:
BAS*
Adjust the bass.
2
(bass)
TRE*
2
Adjust the treble.
(treble)
FAD*
3,
*
7
Adjust the front
(fader)
and rear speaker
balance.
BAL*
7
Adjust the left
(balance)
and right speaker
balance.
LOUD*
2
Boost low and
(loudness)
high frequencies
to produce a well-
balanced sound at
low volume level.
SUB. W*
4
Adjust the
(subwoofer)
subwoofer output
level.
VOL*
Adjust the
5
(volume)
volume.
2
*
When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including "USER."
3
*
If you are using a two-speaker system, set
the fader level to "00."
4
*
This takes effect only when a subwoofer is
connected.
5
*
Normally the control dial works as the
volume control. So you do not have to select
"VOL" to adjust the volume level.
6
*
Depending on the amplifier gain control
setting. (See page 22 for details.)
7
*
This adjustment cannot affect the subwoofer
output.
Range
–06 (min.)
to
+06 (max.)
–06 (min.)
to
+06 (max.)
R06 (Rear
only)
to
F06 (Front
only)
L06 (Left
only)
to
R06 (Right
only)
LOUD ON
J
LOUD
OFF
00 (min.)
to
08 (max.)
00 (min.)
to
30 or 50
(max.)*
6
19
Hide quick links:
Advertisement
Chapters
Table of Contents
