Download Print this page

JVC KD-AR260 Instructions Manual

Jvc cd receiver instructions
Hide thumbs


• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 8.
• Cet appareil est équipé d'une fonction de démonstration des affichages. Pour l'annuler, référez-
vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the
cabinet. Retain this information
for future reference.
Model No.
Serial No.



  Related Manuals for JVC KD-AR260

  Summary of Contents for JVC KD-AR260

  • Page 1 For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS KD-AR260/KD-G210 KD-AR260/KD-G210 KD-AR260/KD-G210 SOUND SOURCE SOUND...
  • Page 2: How To Reset Your Receiver

    INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 3: Table Of Contents

    Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your receiver ... How to forcibly eject a disc ...
  • Page 4: Location Of The Buttons

    LOCATION OF THE BUTTONS Control panel Display window (standby/on attenuator) button 2 SEL (select) button 3 FM/AM button 4 CD button 5 Loading slot 6 Display window 7 0 (eject) button 8 Remote sensor 9 EQ (equalizer) button p 5 (up) button ¡...
  • Page 5: Remote Controller

    Remote controller RM-RK50 SOUND SOURCE 1 • Turns on the unit if pressed when the unit is turned off. • Turns off the unit if pressed and held until “SEE YOU” appears on the display. • Drops the volume level in a moment if pressed briefly.
  • Page 6: Preparing The Remote Controller

    Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Remote sensor • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
  • Page 7: Basic Operations

    Turning on the power Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. Select the source. To operate the tuner (FM or AM), see pages 10 –...
  • Page 8: Canceling The Display Demonstration

    Canceling the display demonstration When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the display demonstration before you use the unit for the first time.
  • Page 9: Setting The Clock

    Setting the clock Press and hold SEL (select) for more than 2 seconds. “DEMO”, “CLOCK H”, “CLOCK M”, “DIMMER”, or “AMP GAIN” appears on the display. Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour.
  • Page 10: Radio Operations

    RADIO OPERATIONS Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station. Searching for a station automatically: Auto search Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: Lights up when receiving an FM stereo...
  • Page 11: Manual Search

    Searching for a station manually: Manual search Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
  • Page 12: Storing Stations In Memory

    Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
  • Page 13: Tuning In To A Preset Station

    Repeat the above procedure to store other stations into other preset numbers. Notes: • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement).
  • Page 14: Cd Operations

    CD OPERATIONS Playing a CD Insert a CD into the loading slot. The unit turns on, draws the CD and starts playback automatically. Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically.
  • Page 15: Locating A Track Or A Particular Portion On A Cd

    Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold ¡, while playing a CD, to fast-forward the track. Press and hold 1, while playing a CD, to reverse the track. To go to the next or previous tracks Press ¢...
  • Page 16: Prohibiting Cd Ejection

    To play back tracks repeatedly (Track Repeat Play) You can play back the current track repeatedly. Press MODE to enter the functions mode while playing a Press RPT (repeat), while “MODE” is still flashing on the display, so that “TRK RPT” appears on the display.
  • Page 17: Sound Adjustments

    Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode (C-EQ: custom equalizer) suitable to the music genre. Select the sound mode you want. Each time you press the button, the sound modes change as follows: USER ROCK JAZZ...
  • Page 18: Adjusting The Sound

    Adjusting the sound You can adjust the sound characteristics to your preference. Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: (bass) (treble) LOUD (volume) (loudness) Indication To do: Adjust the bass. Adjust the treble.
  • Page 19: Other Main Functions

    Selecting the dimmer mode You can dim the display at night (according to your preference). When shipped from the factory, dimmer is deactivated. Press and hold SEL (select) for more than 2 seconds. “DEMO”, “CLOCK H”, “CLOCK M”, “DIMMER”, or “AMP GAIN” appears on the display. Select “DIMMER”...
  • Page 20: Detaching The Control Panel

    Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
  • Page 21: Troubleshooting

    Signals are too weak. The antenna is not connected firmly. CD is inserted upside down. CD-R/CD-RW is not finalized. CD is locked. The CD player may have functioned incorrectly. You are driving on rough roads. CD is scratched. Connections are incorrect.
  • Page 22: Maintenance

    • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.
  • Page 23: Specifications

    Stereo Separation: 35 dB Capture Ratio: 1.5 dB [AM Tuner] Sensitivity: 20 µV Selectivity: 35 dB SPECIFICATIONS CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz...
  • Page 24 Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 We can help you! EN, SP, FR 0904DTSINTJEIN © 2004 Victor Company of Japan, Limited...
  • Page 25 This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. Parts list for installation and connection The following parts are provided for this unit.
  • Page 26 Removing the unit Before removing the unit, release the rear section. When using the optional stay / Cuando emplea un soporte opcional / Lors de l’utilisation du hauban en option Fire wall Tabique a prueba de incendios Cloison Dashboard Tablero de instrumentos Tableau de bord Install the unit at an angle of less than 30˚.
  • Page 27: Electrical Connections

    • Reemplace el fusible por uno con la corriente especificada. Si el fusible se quemase frecuentemente consulte con su concesionario de JVC de equipos de audio para automóviles. • Se recomienda conectar los altavoces con una potencia máxima de más de 50 W (tanto atrás como adelante, con una impedancia de 4 Ω...
  • Page 28 • Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused. Rear speakers Altavoces traseros Enceintes arrière INPUT Amplificador de JVC LINE REAR Signal cord (not supplied for this unit) Front speakers Cable de señal (no suministrado con...

This manual is also suitable for: