Download  Print this page

JVC KD-G510 Instructions Manual

Jvc cd receiver instructions
Hide thumbs


For canceling the display demonstration, see page 8.
Para cancelar la demostración en pantalla, consulte la página 8.
Pour annuler la démonstration des affichages, référez-vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information for
future reference.
Model No.
Serial No.


Table of Contents

  Also See for JVC KD-G510

  Summary of Contents for JVC KD-G510

  • Page 1 Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS KD-AR560/KD-G510 KD-AR560/KD-G510 KD-AR560/KD-G510 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet.
  • Page 2: How To Reset Your Unit

    How to reset your unit • This will reset the microcomputer. Your preset adjustments will also be erased. Thank you for purchasing a JVC product. How to forcibly eject a disc If a disc cannot be recognized by the receiver or cannot be ejected, ejects the disc as follows.
  • Page 3: Table Of Contents

    How to forcibly eject a disc ... How to read this manual ... How to use the M MODE button ... Control panel — ... 5 KD-AR560/KD-G510 Parts identification ... Remote controller — RM-RK50 Main elements and features ... Getting started ... 7 Basic operations ...
  • Page 4: How To Read This Manual

    How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 30 and 31). • Button operations are mainly explained with the illustrations as follows: Press briefly.
  • Page 5: Control Panel

    SSM (Strong-station Sequential Memory) button y RPT (repeat) button u RND (random) button i M MODE button o AUX (auxiliary) input jack • NOT compatible with digital signals. KD-AR560/KD-G510 Parts identification Display window ; Disc information indicators—TAG (ID3 Tag), (folder), a Main display...
  • Page 6: Remote Controller

    Remote controller — Installing the lithium coin battery (CR2025) • When operating, aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between. Warning: • Store the battery in a place where children cannot reach to avoid risk of accident.
  • Page 7: Getting Started

    Getting started Ÿ You cannot select some sources if they are not ready. • For FM/AM tuner only • For SIRIUS ® radio only Basic operations ⁄ Adjust the sound as you want. (See pages 18 and 19.) To drop the volume in a moment (ATT) To turn off the power Volume level appears.
  • Page 8: Canceling The Display Demonstrations

    Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 20. Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock Set the hour and minute. 1 Select “CLOCK H”...
  • Page 9: Radio Operations

    Radio operations Ÿ Selected band appears. Lights up when receiving an FM stereo broadcast with sufficient signal strength. Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. Listening to the radio To tune in to a station manually In step ! on the left...
  • Page 10: Storing Stations In Memory

    When an FM stereo broadcast is hard to receive Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in memory You can preset six stations for each band.
  • Page 11: Listening To A Preset Station

    Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. Preset number flashes for a while. Listening to a preset station Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station * If no title is assigned to a station, “NO NAME”...
  • Page 12: Disc Operations

    Disc operations About MP3 and WMA discs MP3 and WMA (Windows Media “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting an MP3 or a WMA disc: Total folder Total track number number Disc information appears automatically (see page 16).
  • Page 13: Playing Discs In The Cd Changer

    Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs.
  • Page 14 • When the current disc is an MP3 disc: Folder name Selected folder number Disc information appears automatically (see page 16). Clock “ROOT” appears if no folder is included in the disc. • When the current disc is an audio CD or a CD Text disc: CD Text: Disc title/performer = Track title appears automatically...
  • Page 15: Other Main Functions

    To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digits number at the beginning of their folder names—01, 02, 03, and so on.
  • Page 16: Changing The Display Information

    While playing an audio CD or a CD Text ( If no title is assigned to an audio CD, “NO NAME” appears. To assign a title to an audio CD, see page 23. While playing an MP3 ( • When “TAG DISP” is set to “TAG ON” (see page 22) If an MP3/WMA file does not have ID3 tags, folder name and file name appear.
  • Page 17: Selecting The Playback Modes

    Selecting the playback modes You can use only one of the following playback modes at a time. Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc in the receiver Random play Ex.: When “DISC RND”...
  • Page 18: Sound Adjustments

    Sound adjustments Selecting preset sound modes You can select a preset sound mode suitable to the music genre. Ex.: When “ROCK” is selected Indication pattern for each sound mode: (C-EQ: custom equalizer) Preset values Indication For: BAS * USER (Flat sound) ROCK Rock or disco music...
  • Page 19: Adjusting The Sound

    Adjusting the sound You can adjust the sound characteristics to your preference. For KD-G510: Displayed only when “L/O MODE” is set to “WOOFER” (see page 21). Ex.: When “TRE” is selected Indication pattern changes as you adjust the level. Indication...
  • Page 20: General Settings - Psm

    General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed (except for SID) in the table that follows. Select a PSM item. Ex.: When you select “DIMMER” Indications DEMO Display demonstration CLOCK H Hour adjustment CLOCK M Minute adjustment CLK ADJ*...
  • Page 21 Some characters or symbols will not be shown (and will be blanked) on the display. (Ex. “ABCå!d#” ]“ABCA D ”.) For KD-G510: Displayed only when “L/O MODE” is set to “WOOFER.” Displayed only when one of the following sources is selected—FM, AM, or CD, or AUX IN.
  • Page 22 Indications AUX ADJ Auxiliary input level adjustment TAG DISP Tag display AMP GAIN Amplifier gain control AREA Tuner channel interval Selectable settings, [reference page] A.ADJ 00 – A.ADJ 05: Adjust the auxiliary input level accordingly, to avoid the sudden increase of the output level when changing the source from external component connected to the AUX input jack on the control panel.
  • Page 23: Other Main Functions

    Other main functions Assigning titles to the sources You can assign titles to station frequencie and CDs (both in this receiver and in the CD changer). Maximum number of Sources characters FM/AM tuner Up to 8 characters (up to 30 station frequencies including both FM and CDs/CD-CH Up to 32 characters (up to...
  • Page 24: Detaching The Control Panel

    Attaching the control panel Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
  • Page 25: External Component Operations

    External component operations Playing an external component You can connect an external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied), and another to the AUX (auxiliary) input jack on the control panel. •...
  • Page 26: Sirius ® Radio Operations

    SIRIUS radio DLP—Down Link Processor (optionally purchased) to the CD changer jack on the rear. • You can also connect the JVC SIRIUS radio PnP (Plug and Play), KT-SR1000 or KT-SR2000, using the JVC SIRIUS radio adapter, KS-U100K (not supplied). By turning on the power of the receiver, you can turn on/off the JVC PnP.
  • Page 27: Listening To The Sirius ® Radio

    Listening to the SIRIUS Ÿ Select a category. You can tune in to all the channels of every category by selecting “ALL.” Selecting a particular category (SPORTS, ENTERTAINMENT, etc.) allows you to enjoy only the channels from the selected category. radio ®...
  • Page 28: Storing Channels In Memory

    Storing channels in memory You can preset six channels for each band. Ex.: Storing a channel into preset number 4. Perform steps tune in to a channel you want. Preset number flashes for a while. Listening to a preset channel Select the preset channel (1 –...
  • Page 29: Maintenance

    Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player in the following cases: •...
  • Page 30: More About This Receiver

    More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
  • Page 31: General Settings—Psm

    Playing an MP3/WMA disc • This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower). • This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files.
  • Page 32: Troubleshooting

    Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • Sound cannot be heard from the speakers. • This receiver does not work at all. • SSM automatic presetting does not work.
  • Page 33 Symptoms • Disc cannot be played back. • Noise is generated. • A longer readout time is required (“CHECK” keeps flashing on the display). • Tracks cannot be played back as you have intended them to play. • Elapsed playing time is not correct.
  • Page 34 Symptoms • “NO DISC” appears on the display. • “NO MAG” appears on the display. • “RESET 8” appears on the display. • “RESET 1” – “RESET 7” appears on the display. • The CD changer does not work at all. •...
  • Page 35: Specifications

    Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Line-Out Level/Impedance: KD-AR560: 4.0 V/20 kΩ load (full scale) KD-G510: 2.5 V/20 kΩ load (full scale) Output Impedance: 1 kΩ Subwoofer-Out Level/Impedance: 2.0 V/20 kΩ load (full scale)
  • Page 36 The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this receiver correctly, have it installed by a qualified technician.
  • Page 37: Electrical Connections

    Notas: • Reemplace el fusible por uno con la corriente especificada. Si el fusible se quemase frecuentemente consulte con su concesionario de JVC de equipos de audio para automóviles. • Se recomienda conectar los altavoces con una potencia máxima de más de 50 W (tanto atrás como adelante, con una impedancia de 4 Ω...
  • Page 38 ENGLISH Typical Connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this receiver. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.
  • Page 39 • Set “EXT IN” to “CHANGER” (See page 21 of the INSTRUCTIONS.) / Ajuste “EXT IN” a “CHANGER” (Consulte la página 21 del MANUAL DE INSTRUCCIONES.) / Réglez “EXT IN” sur “CHANGER” (Voir la page 21 du MANUEL D’INSTRUCTIONS.) JVC CD changer and DLP (Down Link Processor) / Cambiador de CD de JVC y DLP (“Down Link Processor”) JVC / Changeur de CD JVC et Processeur DLP (Processeur de signaux satellite-terre) JVC •...
  • Page 40 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 We can help you! EN, SP, FR © 2004 Victor Company of Japan, Limited 1104DTSMDTJEIN...

This manual is also suitable for: