Adjusting The Sound - JVC KS-FX440 Instructions Manual

Adjusting the sound
You can adjust the treble/bass sounds and the speaker balance.
2 1
Cea.) Select the item you want to adjust.
BAS—>TRE—-FAR— SRL VOL
Indication To do: Range
BAS Adjust the bass ~6 (min.) — +6 (max.)
(bass)
TRE | Adjust the treble -6 (min.) — +6 (max.)
(treble)
FAD Adjust the front and rear speaker R6 (rear only) — F6 (front only)
(Fader)* balance
Esker tne Ae EPA BE GRE
BAL Adjust the left and right speaker L6 (left only) — R6 (right only)
(Balance) | balance
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
Note:
* If vou are using a two-speaker system, set the fader level to "00" (center).
Adjust the level.
Note:
Normally the + and -— buttons work as the volume control buttons.
Sa you do not have to select "VOL" to adjust the volume level.
13 14
To adjust the bass or treble sound level
Select "BAS" or "TRE."
: To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
Within
5 seconds
and off alternatively. (> go to step 4)
Adjust the bass or treble level.
See page 13 for details.
Press and hold SOUND until the sound mode
Your setting is stored in memory.
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 12.
OveXsA-Sy Ovrxs-Sm